Index
IN-42
Software Configuration Guide—Release IOS XE 3.9.0E and IOS 15.2(5)E
virtual ports, MKA 4
Virtual Router Redundancy Protocol, introduction 23
Virtual Switch System(VSS), displaying EtherChannel to
20
VLAN ACLs
See VLAN maps
VLAN blocking, REP
13
vlan command 6
vlan dot1q tag native command 4
VLAN ID
service provider
8
VLAN ID translation
See VLAN mapping
VLAN ID, discovering
44
VLAN load balancing
REP
4
VLAN load balancing on flex links 2
configuration guidelines 5
VLAN load balancing, triggering 6
VLAN Management Policy Server
See VMPS
VLAN mapping
1-to-1
7
1-to-1, configuring 10
configuration guidelines 9
configuring 10
configuring on a trunk port 10
default 9
described 2, 7
selective QinQ 8
selective Q-in-Q, configuring 12
traditional QinQ 8
traditional Q-in-Q, configuring 11
types of 7
VLAN maps
applying to a VLAN
25
configuration example 26
configuration guidelines 22
configuring 21
creating and deleting entries 22
defined 41
denying access example 27
denying packets 23
displaying 28
order of entries 22
permitting packets 23
router ACLs and 29
using (figure) 5
using in your network 25
VLAN maps, PACL and Router ACLs 36
VLAN Trunking Protocol
See VTP
VLAN trunks
overview
3
VLAN User Distribution, configuring 802.1X 68
VLANs
allowed on trunk
5
configuration guidelines 3
configuring 5
configuring as Layer 3 interfaces 8
customer numbering in service-provider networks 3
default configuration 4
description 11
extended range 3
IDs (default) 4
interface assignment 7
limiting source traffic with RSPAN 23
monitoring with RSPAN 21
name (default) 4
normal range 3
overview 1
reserved range 3
See also PVLANs
VMPS
configuration file example
31
configuring dynamic access ports on client 24
configuring retry interval 26
database configuration file 31
To Next Page
Loading...
