Contents
33
Software Configuration Guide—Release IOS XE 3.9.xE and IOS 15.2(5)Ex
Related Documents 40-28
Standards 40-28
MIBs 40-29
RFCs 40-29
Technical Assistance 40-29
Configuring Campus Fabric 41-1
About Campus Fabric 41-1
Understanding Fabric Domain Elements 41-2
Supported Platforms in Campus Fabric 41-3
Campus Fabric Configuration Guidelines 41-3
Limitations and Restrictions 41-3
How to Configure Campus Fabric 41-4
Configuring Fabric Edge Devices 41-4
Before You Begin 41-4
Security Group Tags and Policy Enforcement in Campus Fabric 41-5
Auto-Configured Commands on Fabric Edge Devices 41-5
Multicast Using Campus Fabric Overlay 41-7
Configuring Multicast PIM Sparse Mode in Campus Fabric 41-7
Configuring Multicast PIM SSM in Campus Fabric 41-8
Dataplane Security 41-9
Configuring Dataplane Security on Fabric Edge Devices 41-9
Before You Begin 41-9
Campus Fabric Configuration Examples 41-10
Configuring Policy-Based Routing 42-1
Policy-Based Routing 42-1
Route Maps 42-2
Understanding Route Maps 42-2
PBR Route-Map Processing Logic 42-3
Load Balancing with Recursive Next Hop 42-4
Packet Matching Criteria 42-4
PBR Route-Map Processing Logic Example 42-4
Policy-Based Routing with Object Tracking 42-6
Restrictions for Policy-Based Routing with Object Tracking 42-6
IPv4 and IPv6 Policy-Based Routing for VRF Instances 42-6
Inherit-VRF, Inter-VRF, Global-to-VRF, and VRF-to-Global Routing 42-6
Restrictions for VRF-Aware Policy-Based Routing 42-7
Policy-Based Routing Configuration Tasks 42-7
To Next Page
Loading...
