Cisco Catalyst 4500 Series - Page 64

Contents
60
Software Configuration Guide—Release IOS XE 3.9.xE and IOS 15.2(5)Ex
SNMP Examples 72-15
Displaying SNMP Status 72-16
Configuring NetFlow-lite 73-1
About NetFlow Packet Sampling 73-1
Feature Interaction 73-2
System-wide Restrictions 73-2
Interface-level Restrictions 73-2
Monitor-level Restrictions 73-2
Configuring NetFlow Packet Sampling 73-2
Configuring Information about the External Collector 73-2
Example 73-3
Usage Guidelines 73-4
Configuring Sampling Parameters 73-4
Example 73-5
Usage Guidelines 73-5
Activating Sampling on an Interface or VLAN 73-5
Examples 73-6
Usage Guidelines 73-7
Display Commands 73-8
Clear Commands 73-9
Configuring Flexible NetFlow 74-1
VSS Environment 74-1
Non-VSS Environment 74-8
Configuring Ethernet OAM and CFM 75-1
About Ethernet CFM 75-2
Ethernet CFM and OAM Definitions 75-2
CFM Domain 75-3
Maintenance Associations and Maintenance Points 75-4
CFM Messages 75-5
Crosscheck Function and Static Remote MEPs 75-5
SNMP Traps and Fault Alarms 75-5
Configuration Error List 75-6
IP SLAs Support for CFM 75-6
Configuring Ethernet CFM 75-6
Ethernet CFM Default Configuration 75-7
Ethernet CFM Configuration Guidelines 75-7
Configuring the CFM Domain 75-8