Contents
61
Software Configuration Guide—Release IOS XE 3.9.xE and IOS 15.2(5)Ex
Configuring Ethernet CFM Crosscheck 75-11
Configuring Static Remote MEP 75-13
Configuring a Port MEP 75-14
Configuring SNMP Traps 75-16
Configuring Fault Alarms 75-16
Configuring IP SLAs CFM Operation 75-18
Manually Configuring an IP SLAs CFM Probe or Jitter Operation 75-19
Configuring an IP SLAs Operation with Endpoint Discovery 75-21
Configuring CFM on C-VLAN (Inner VLAN) 75-24
Feature Support and Behavior 75-26
Platform Restrictions and Limitations 75-26
Understanding CFM ITU-T Y.1731 Fault Management 75-27
Y.1731 Terminology 75-27
Alarm Indication Signals 75-28
Ethernet Remote Defect Indication 75-28
Multicast Ethernet Loopback 75-29
Configuring Y.1731 Fault Management 75-29
Default Y.1731 Configuration 75-29
Configuring ETH-AIS 75-29
Using Multicast Ethernet Loopback 75-31
Managing and Displaying Ethernet CFM Information 75-31
About Ethernet OAM Protocol 75-33
OAM Features 75-34
OAM Messages 75-34
Enabling and Configuring Ethernet OAM 75-35
Ethernet OAM Default Configuration 75-35
Ethernet OAM Configuration Guidelines 75-35
Enabling Ethernet OAM on an Interface 75-36
Enabling Ethernet OAM Remote Loopback 75-37
Configuring Ethernet OAM Link Monitoring 75-38
Configuring Ethernet OAM Remote Failure Indications 75-42
Configuring Ethernet OAM Templates 75-45
Displaying Ethernet OAM Protocol Information 75-49
Ethernet CFM and Ethernet OAM Interaction 75-51
Configuring Ethernet OAM Interaction with CFM 75-51
Configuring the OAM Manager 75-52
Enabling Ethernet OAM 75-52
Example: Configuring Ethernet OAM and CFM 75-53
To Next Page
Loading...
