Contents
63
Software Configuration Guide—Release IOS XE 3.9.xE and IOS 15.2(5)Ex
Configuring Cisco IOS IP SLA Operations 78-1
Understanding Cisco IOS IP SLAs 78-2
Using Cisco IOS IP SLAs to Measure Network Performance 78-3
IP SLAs Responder and IP SLAs Control Protocol 78-4
Response Time Computation for IP SLAs 78-4
IP SLAs Operation Scheduling 78-5
IP SLAs Operation Threshold Monitoring 78-5
Configuring IP SLAs Operations 78-6
IP SLA Default Configuration 78-6
IP SLA Configuration Guidelines 78-7
Configuring the IP SLAs Responder 78-7
Analyzing IP Service Levels by Using the UDP Jitter Operation 78-8
Analyzing IP Service Levels by Using the ICMP Echo Operation 78-11
Monitoring IP SLAs Operations 78-13
Configuring RMON 79-1
About RMON 79-1
Configuring RMON 79-3
Default RMON Configuration 79-3
Configuring RMON Alarms and Events 79-3
Configuring RMON Collection on an Interface 79-5
Displaying RMON Status 79-6
Performing Diagnostics 80-1
Configuring Online Diagnostics 80-1
Configuring On-Demand Online Diagnostics 80-2
Scheduling Online Diagnostics 80-2
Performing Diagnostics 80-3
Starting and Stopping Online Diagnostic Tests 80-3
Displaying Online Diagnostic Tests and Test Results 80-4
Displaying Data Path Online Diagnostics Test Results 80-7
Line Card Online Diagnostics 80-8
Troubleshooting with Online Diagnostics 80-8
Power-On Self-Test Diagnostics 80-10
Overview of Power-On Self-Test Diagnostics 80-10
POST Result Example 80-11
Power-On Self-Test Results 80-13
Sample Display of the POST on an Active Supervisor Engine 80-13
Sample Display of the POST on a Standby Supervisor Engine 80-16
Troubleshooting the Test Failures 80-20
To Next Page
Loading...
