Contents
64
Software Configuration Guide—Release IOS XE 3.9.xE and IOS 15.2(5)Ex
Configuring WCCP Version 2 Services 81-1
Understanding WCCP 81-1
Overview 81-2
Hardware Acceleration 81-2
Understanding WCCP Configuration 81-3
WCCP Features 81-3
HTTP and Non-HTTP Services Support 81-4
Multiple Routers Support 81-4
MD5 Security 81-4
Web Content Packet Return 81-4
Restrictions for WCCP 81-5
Configuring WCCP 81-5
Configuring a Service Group Using WCCP 81-5
Specifying a Web Cache Service 81-7
Using Access Lists for a WCCP Service Group 81-8
Setting a Password for a Switch and Cache Engine 81-8
Verifying and Monitoring WCCP Configuration Settings 81-9
WCCP Configuration Examples 81-9
Example: Performing a General WCCP Configuration 81-10
Example: Running a Web Cache Service 81-10
Example: Running a Reverse Proxy Service 81-10
Example: Running TCP-Promiscuous Service 81-11
Example: Running Redirect Access List 81-12
Example: Using Access Lists 81-12
Example: Setting a Password for a Switch and Content Engines 81-13
Example: Verifying WCCP Settings 81-13
Configuring MIB Support 82-1
Determining MIB Support for Cisco IOS Releases 82-1
Using Cisco IOS MIB Tools 82-1
Downloading and Compiling MIBs 82-2
Guidelines for Working with MIBs 82-2
Downloading MIBs 82-3
Compiling MIBs 82-4
Enabling SNMP Support 82-4
Configuring Easy Virtual Network 83-1
Prerequisites for Configuring Easy Virtual Network 83-1
Restrictions for EVN 83-1
To Next Page
Loading...
