Index
IN-31
Software Configuration Guide—Release IOS XE 3.9.0E and IOS 15.2(5)E
sharing link bandwidth 9
quad-supervisor
uplink forwarding
6
Quality of service
See QoS
queueing
8
queue-limiting, QoS on Sup 6-E 31, 65
R
RA Guard
configuring
51
deployment 50
examples 51
introduction 49
usage guidelines 52
RADIUS
attributes
vendor-proprietary
112
vendor-specific 111
change of authorization 97
configuring
accounting
110
authentication 105
authorization 109
communication, global 103, 110
communication, per-server 103
multiple UDP ports 103
default configuration 102
defining AAA server groups 107
displaying the configuration 115
identifying the server 103
limiting the services to the user 109
method list, defined 102
operation of 97
server load balancing 115
suggested network environments 96
tracking services accessed by user 110
understanding 96
RADIUS Change of Authorization 97
RADIUS server
configure to-Switch communication
32
configuring settings 34
parameters on the switch 32
RADIUS, controlling switch access with 95
range command 4
range macros
defining
10
ranges of interfaces
configuring
4
Rapid Spanning Tree
See RSTP
rcommand command
13
reachability, tracking IP SLAs IP host 10
re-authentication of a client
configuring manual
94
enabling periodic 81
redirect URLs, port-based authentication 19
reduced MAC address 2
redundancy
configuring
7
guidelines and restrictions 5
changes made through SNMP 11
NSF-aware support 2
NSF-capable support 2
overview 2
redundancy command 8, 7
understanding synchronization 4
redundancy (NSF) 1
configuring
BGP
11
CEF 11
EIGRP 16
IS-IS 14
OSPF 13
routing protocols 5
redundancy (RPR)
route processor redundancy
2
To Next Page
Loading...
