Index
IN-30
Software Configuration Guide—Release IOS XE 3.9.0E and IOS 15.2(5)E
configuring 11, 17, 21
PVLANs
802.1q support
14
across multiple switches 5
configuration guidelines 12
configure port security 14, 16, 18
configure port security in a wireless setting 32
configuring 11
configuring a VLAN 15
configuring promiscuous ports 17
host ports
configuring a Layer 2 interface
18
setting 24
overview 1
permitting routing, example 23
promiscuous mode
setting
24
setting
interface mode
24
PVST+ simulation 36
Q
QoS
classification
6–??
definitions 3
enabling per-port per-VLAN 36, 70
overview 1
overview of per-port per-VLAN 10
packet modification 9
traffic shaping 9
See also COS; DSCP values; transmit queues
QoS active queue management
tracking queue length
9
QoS labels
definition
3
QoS marking
description
5
QoS on Sup 6-E
Active Queue management via DBL
34, 68
active queue management via DBL 27, 34, 61, 68
classification 16, 50
configuring 13, 47
configuring CoS mutation 45, 79
configuring the policy map marking action 23, 57
hardware capabilities for marking 23, 57
how to implement policing 18, 52
marking action drivers 21, 55
marking network traffic 18, 52
MQC-based QoS configuration 13, 48
multi-attribute marking support 22, 56
platform hardware capabilities 15, 49
platform restrictions 18, 52
platform-supported classification criteria and QoS
features
13, 14, 48
policing 17, 51
policy associations 39, 73
prerequisites for applying a service policy 15, 49
priority queuing 30, 64
queue-limiting 31, 65
restrictions for applying a service policy 15, 50
shaping 25, 59
sharing(bandwidth) 27, 61
sharing(blandwidth), shapring, and priority queuing
25, 59
software QoS 40, 74
traffic marking procedure flowchart 21, 55
QoS policing
definition
5
described 8
QoS policy
attaching to interfaces
8
QoS service policy
prerequisites
15, 49
restrictions for applying 15, 50
QoS transmit queues
burst
9
maximum rate 9
To Next Page
Loading...
