Cisco Catalyst 4500 Series - Page 2073

Index
IN-33
Software Configuration Guide—Release IOS XE 3.9.0E and IOS 15.2(5)E
enabling alarms and events 3
groups supported 2
overview 1
ROM monitor
boot process and
26
CLI 7
commands 2–3
debug commands 5–6
entering 1
exiting 6
overview 1
root bridge
configuring
9
selecting in MST 22
root guard
and MST
23
enabling 2
overview 2
route maps
defining
8, 10, 12
PBR 2
route targets
VPN
3
routed packets
ACLs
30
route-map (IP) command 8, 10, 12
router ACLs
description
41, 3
using with VLAN maps 29
router ACLs, using PACL with VLAN maps 36
Routing Information Protocol
See RIP
RPF
See Unicast RPF
RSPAN
configuration guidelines
16
destination ports 5
IDS 2
monitored ports 4
monitoring ports 5
received traffic 3
sessions
creating
17
defined 3
limiting source traffic to specific VLANs 23
monitoring VLANs 21
removing source (monitored) ports 20
specifying monitored ports 17
source ports 4
transmitted traffic 4
VLAN-based 5
RSTP
compatibility
23
description 22
port roles 24
port states 24
S
S/M, 224/4 13
SAID
See 802.10 SAID
SAP
defined
20
negotiation 20
support 1
scheduling 8
scheduling, IP SLAs operations 5
secondary edge port, REP 4
secondary root switch 12
secondary VLANs 2
associating with primary 16
permitting routing 23
security
configuring
1
Security Association Identifier
See 802.10 SAID
Security Exchange Protocol