11. VECTOR DISPLAY
210
• Scale
The scale selected with COLOR BAR on the COLOR SYSTEM menu is displayed in cyan in the
COLORBAR on the upper left of the screen.
[See also] COLOR BAR → 11.11.2, "Displaying a Scale for 75% Color Bars"
11.1 Operation Key Description
Operation keys other than S-CUT key can be controlled from the mouse and touch panel.
On the vector display, you can press the operation keys to change the following settings.
(Some settings may not be changed.)
Key assignments can be changed freely on the OPERATION KEY tab.
[See also] OPERATION KEY tab → 7.2.13, “Setting the Operation keys”
Table 11-1 Operation Key Actions
To Next Page
Loading...
