Leader LV5300A - Setting the Superimpose Feature (SER21); Selecting the Closed Caption Display; Selecting the Format of English Closed Captions

13. Picture Screen
263
13.5 Setting the Superimpose Feature (SER21)
The superimpose feature displays closed caption information on top of pictures.
To display the closed caption information, press F•5 SUPER IMPOSE on the PIC CONFIG menu.
This menu item is not displayed when the input signal is 3G-B.
PIC → F•1 PIC CONFIG → F•5 SUPER IMPOSE →
Figure 13-15 SUPER IMPOSE menu
13.5.1 Selecting the Closed Caption Display
To select the closed caption to display over the picture, follow the procedure below. If you
select OFF, no closed captions will be displayed.
Procedure
PIC → F•1 PIC CONFIG → F•5 SUPER IMPOSE → F•1 STANDARD: OFF / SMPTE / ARIB /
TELETEXT
Settings
OFF: Closed captions are not displayed.
SMPTE: English closed captions are displayed. This cannot be selected in 6G.
ARIB: Simple Japanese closed captions are displayed. This cannot be selected in
6G.
TELETEXT: European closed captions are displayed. This can be selected in SD or HD.
On the Japanese closed caption display, if a clear screen command is received, "CS" is
displayed in cyan for approximately 0.5 seconds in the upper right of the screen.
13.5.2 Selecting the Format of English Closed Captions
To select the English closed caption format from the four types below, follow the procedure
below.
Procedure
PIC → F•1 PIC CONFIG → F•5 SUPER IMPOSE → F•2 FORMAT: 608(708) / 608(608) /
VBI / 708
Settings
608(708): CEA/EIA-608-B English closed caption information that is embedded in
EIA-708-B CDP packets is displayed.
608(608): CEA/EIA-608-B English closed caption information is displayed.
VBI: CEA/EIA-608-B English closed caption information that is embedded in
vertical blanking intervals is displayed. This can be selected in SD.
708: EIA-708 English closed caption information that is embedded in EIA-708-
B CDP packets is displayed.