21. FIRMWARE UPDATE HISTORY
This manual is written for firmware version 6.5.
You can view the firmware version by pressing F•3 SYSTEM INFO on the SYS menu.
• Ver. 6.5
• Minor changes
• Ver. 6.4
• [LV5300/LV5300A/LV5350/LV7300-SER01/LV7300-SER02] Added color bar scale
information display to the vector screen.
• [LV5300/LV5300A/LV5350/LV7300-SER01/LV7300-SER02] SR Live Metadata Ver.1.10 in the
analysis display of SR Live Metadata on the status screen is now supported.
• [SER23] Added HDR information display to the vector screen.
• Ver. 6.3
• Minor changes
• Ver. 6.2
• [LV5300/LV5300A/LV5350/LV7300] NTP (SNTP) supports all time zones.
• [LV5300/LV5300A/LV5350/LV7300-SER01/LV7300-SER02] Added a remote command to
get the maximum and minimum values of Y/R/G/B/CMP by TELNET/SNMP when displaying
vector 5BAR.
• Ver. 6.1
• [LV5300/LV5300A/LV5350/LV7300-SER01/LV7300-SER02] Added color wheel display to the
VECT menu.
• Ver. 6.0
• [SER23] Improved to display HDR unit in Nits.
• Ver. 5.9
• [LV5300/LV5300A/LV5350/LV7300] LV5300A is now supported.
• [SER21] Improved to display "V, S, L, D" additional information in the CONTENT ADVISORY
display in English subtitles (EIA-608 / 708) display of the picture.
• Ver. 5.8
• Minor changes
• Ver. 5.7
• Minor changes
• Ver. 5.6
• [LV5300/LV5350/LV7300-SER01/LV7300-SER02] Improved so that the splice_request_data
of SCTE-104 can be analyzed and displayed and logged in the picture and status.
• [LV5300/LV5350/LV7300-SER01/LV7300-SER02] Improved the color gamut error in the
status so that the event log now shows whether the error is due to the upper threshold or
the lower threshold for each of R, G, and B.
• [LV5300/LV5350/LV7300-SER01/LV7300-SER02] Improved the level error in the status so
that the event log now shows whether the error is due to the upper threshold or the lower
To Next Page
Loading...
