Leader LV5300A - Tally Display; Camera ID Display

3. SPECIFICATIONS
48
Jitter Filter
10Hz HPF 10Hz
100Hz HPF 100Hz
1 kHz HPF 1 kHz
100 kHz HPF 100 kHz
TIMING HPF 10Hz
ALIGNMENT
12G (SER28), 6G (SER28)
HPF 100 kHz
3G, HD HPF 100 kHz
SD HPF 1 kHz
Cursor Measurement Jitter value measurement through the use of cursors
Automatic Measurement Display Feature
Displays the jitter value in seconds (sec) and unit intervals
(UI)
Automatic Measurement Items
Timing jitter, alignment jitter, jitter
Accuracy Input jitter frequency: 1 kHz. Filter setting: 10 Hz, within
measurement range
0 UI < automatic measured value ≤ 1 UI
±10 % + 0.07 UI
1 UI < automatic measured value ≤ 7 UI
±10 %
*1 2V display is not possible when the input signal is progressive.
3.3.28 Tally Display
Number of Displays 3 (TALLY-1, TALLY-2, TALLY-EXT) (*1)
Display Colors 7 colors to choose from
Control Method Remote connector, RS-422/485 connector (SER27)
*1 The number of displays per channel. Arranged using the customized layout feature or the
enhanced layout feature.
3.3.29 Camera ID Display
Number of Displays 2 (LABEL-1, LABEL-2) (*1)
Iris Display 1 (IRIS) (*1)
Control Method Instrument
*1 The number of displays per channel. Arranged using the customized layout feature or the
enhanced layout feature.