Leader LV5300A - Standard Mibs

19. Network Control
470
19.5.3 Standard MIBs
The instrument uses the following standard MIBs:
• RFC1213 (MIB-Ⅱ)
• RFC1354 (IP Forwarding Table MIB)
In the tables, "ACCESS" and "SUPPORT" indicate the following:
Indication
Description
ACCESS
R/O
Information that can be read from the SNMP managers.
R/W
Information that can be read and written from the SNMP managers
SUPPORT
Y
Supports the MIB object as defined by the standard.
R/O
Reading and writing are possible according to the standard, but the
instrument only supports reading.
N
Not supported.
• system group
MIB
OID
SYNTAX
ACCESS
SUPPORT
sysDescr
system.1
DisplayString
R/O
Y
sysObjectID
system.2
ObjectID
R/O
Y
sysUpTime
system.3
TimeTicks
R/O
Y
sysContact
system.4
DisplayString
R/W
Y
sysName
system.5
DisplayString
R/O
R/O
sysLocation
system.6
DisplayString
R/W
Y
sysServices
system.7
INTEGER
R/O
Y
• interface group
MIB
OID
SYNTAX
ACCESS
SUPPORT
ifNumber
interfaces.1
INTEGER
R/O
Y
ifTable
interfaces.2
Aggregate
-
-
ifEntry
ifTable.1
Aggregate
-
-
ifIndex
ifEntry.1
INTEGER
R/O
Y
ifDescr
ifEntry.2
DisplayString
R/O
Y
ifType
ifEntry.3
INTEGER
R/O
Y
ifMtu
ifEntry.4
INTEGER
R/O
Y
ifSpeed
ifEntry.5
Gauge
R/O
Y
ifPhysAddress
ifEntry.6
OctetString
R/O
Y
ifAdminStatus
ifEntry.7
INTEGER
R/O
R/O
ifOperStatus
ifEntry.8
INTEGER
R/O
Y
ifLastChange
ifEntry.9
TimeTicks
R/O
Y
ifInOctets
ifEntry.10
Counter
R/O
Y
ifInUcastPkts
ifEntry.11
Counter
R/O
Y
ifInNUcastPkts
ifEntry.12
Counter
R/O
Y
ifInDiscards
ifEntry.13
Counter
R/O
Y
ifInErrors
ifEntry.14
Counter
R/O
Y
ifInUnknownProtos
ifEntry.15
Counter
R/O
Y
ifOutOctets
ifEntry.16
Counter
R/O
Y
ifOutUcastPkts
ifEntry.17
Counter
R/O
Y
ifOutNUcastPkts
ifEntry.18
Counter
R/O
Y
ifOutDiscards
ifEntry.19
Counter
R/O
Y
ifOutErrors
ifEntry.20
Counter
R/O
Y
ifOutQLen
ifEntry.21
Gauge
R/O
Y
ifSpecific
ifEntry.22
ObjectID
R/O
Y