Leader LV5300A - Features

3. SPECIFICATIONS
8
3.2 Features
• Support for a Variety of SDI Signal Inputs
12G-SDI, 6G-SDI, 3G-SDI, HD-SDI, and SD-SDI single link, and 4K 3G dual link standards
are supported, allowing SDTV, HDTV, 2K, and 4K video signals to be monitored from a single
unit. Up to two HDTV and SDTV video signals can be displayed simultaneously.
• Superb Operability
Operability was prioritized in the design of these instruments. You can use the best control
interface according to your liking or situation. In addition to the conventional keys and knobs
on the front panel, you can control the instrument remotely using a USB mouse. Further,
the LV5300/LV5300A and LV5350 have a 7-inch full-HD touch panel. The LV7300 can be
connected to a USB touch panel interface of a touch-panel monitor. These interfaces allow
intuitive control and configuration through touch operation.
The LV7300 has dedicated keys for controlling the function menus that can be controlled
from a remote screen.
These instruments can also be controlled remotely by connecting a dedicated remote
controller (sold separately), controlled remotely from a Web browser on a PC over an
Ethernet connection, and used to perform automatic measurements using TELNET or FTP.
• Compact
While providing high flexibility through various options and high functionality for various
situations, the LV5300/LV5300A is 3U half-rack size with 300 mm depth, the LV5350 is 3U
half-rack size with 85 mm depth, and the LV7300 is 1U half-rack size with 300 mm depth.
• 4K Video Format (SER28)
In addition to SD-SDI, HD-SDI, 3G-SDI single link, 6G-SDI single link, 12G-SDI single link,
and 4K 3G dual link are supported. These cover SDI signals from SD video format to HD
video format and even 4K video format.
• Transmission Quality Analysis Function
Signal analysis functions have been enhanced based on the SDI signal measurement
technology that Leader has cultivated over the years. Other enhancements have been made
to various transmission error monitoring, external sync phase difference display, lip sync
measurement (SER20), SDI signal frequency deviation measurement function, equivalent
cable length meter function, and the ancillary data analysis function, which has become
more important with the introduction of 4K video signals.
• Video Analysis Functions
Numerous types of displays are available for the various video signals such as the video
signal waveform display, vector display, picture display, 5-bar display, and CIE chromaticity
diagram display (SER22). In addition, quality control (QoE) functions for video signals are
available including freeze error, black error, and gamut error detection functions. Detected
errors can be recorded in event logs.