16. Status Display
343
• Duration
Set the number of consecutive video frames over which errors must occur to be
recognized as an error. You cannot configure this setting when Composite Gamut Error is
set to OFF.
1 - 60 Frames
• Gamut Details
Turns on and off the extended display of gamut error.
ON / OFF
16.2.4 Error Setup 4
On the ERROR SETUP4 tab, configure freeze error, black error, and level error settings.
Figure 16-5 ERROR SETUP4 tab
• Freeze Error
Select whether to detect freeze errors. If you set this to OFF, you cannot configure the
following settings.
ON / OFF
To Next Page
Loading...
