Leader LV5300A - Adjusting the Volume

15. Audio Display
317
• Parity Error
Turn the parity error detection on or off.
OFF / ON
• Validity Error
Turn the validity error detection on or off.
OFF / ON
• CRC Error
Turn the CRC error detection on or off.
OFF / ON
• Code Violation
Turn the code violation error detection on or off.
OFF / ON
• Clip (METER INDICATION)
If Clip is set to ON, turn on or off the “CLIP” indication that appears when errors occur.
OFF / ON
• Mute (METER INDICATION)
If Mute is set to ON, turn on or off the “M” indication that appears when errors occur.
OFF / ON
15.4 Adjusting the Volume
To adjust the headphone volume, follow the procedure below.
Press the function dial (F•D) to return the setting to its default value (0).
Procedure
AUDIO → F•5 PHONES VOLUME: 0 - 63