3. SPECIFICATIONS
39
3.3.25 Status Display
Signal Detection Detects the presence of an SDI signal
Format Display Displays the video signal format
Frequency Deviation Display
Function Displays the sampling frequency deviation
Displays an error if ±10 ppm is exceeded
Measurement Range ±100 ppm
Precision ±2 ppm
Equivalent Cable Length Display
Function Displays SDI signal attenuation in terms of cable length
Displays an error if the specified cable length is exceeded
Supported Cables
12G L-5.5CUHD
3G, HD LS-5CFB, 1694A
SD L-5C2V, 8281
Display Range
12G < 10 m, 10 to 80 m, > 80 m
3G < 10 m, 10 to 100 m, > 100 m
HD < 10 m, 10 to 130 m, > 130 m
SD < 50 m, 50 to 200 m, > 200 m
Precision
12G, 3G, HD ±20 m
SD ±30 m
Resolution 10 m
Error Count Display Up to 999999 errors for each error type
Count Period 1 second, 1 field (frame)
Embedded Audio Channel Display
Displays the embedded audio channel numbers
* If the input signal is 3G-B-DL, only stream 1 is supported.
SDI Signal Error Detection
CRC Error Detects 3G and HD signal transmission errors
EDH Error Detects SD signal transmission errors
TRS Position Error Detects TRS embedding position errors
TRS Code Error Detects TRS protection bit errors
Line Number Error Detects errors with the line numbers embedded in 3G and HD
signals
Illegal Code Error Detects data within the range of 000 to 003h and 3FC to
3FFh in locations other than TRS and ADF
To Next Page
Loading...
