3. SPECIFICATIONS
38
Status Display (SER20)
Level Audio levels are displayed using numbers (dBFS).
Error Detection Counts the number of errors that occur for each channel
Level Over Counts the number of times that the level of the input signal
exceeds the set value
Detection Setting -40.0 to 0.0 dBFS
Clipping Counts the number of times that a received signal exceeds
the maximum signal value for the specified number of
consecutive samples
Detection Setting 1 to 100 sample
Mute Counts the number of times that the length of a received
mute signal exceeds the specified period
Detection Setting 1 to 5000 ms
Parity Error Counts the number of times that the input signal's parity bit
and the parity bit recalculated by the instrument differ
Validity Error Counts the number of times that the input signal's validity bit
is 1
CRC Error Counts the number of times that the CRC of the channel
status bits and the calculated CRC are different
Code Violation Counts the number of times that the state of the input
signal's biphase modulation is abnormal
Elapsed Time Displays the amount of time that has elapsed since the
instrument was reset
Channel Status Bits Dump display, text display
User Data Bits Dump Display
To Next Page
Loading...
