3. SPECIFICATIONS
28
3.3.15 Vector Display
Vector Mode Vector, RGB vector (SER40), YCbCr vector (SER40)
Display Colors 7 colors to choose from
Blanking Interval H and V blanking periods can be masked (according to the
video signal waveform display settings).
Pseudo-Composite Display Artificially converts component signals into composite signals
and displays the result
Line Select Displays the selected line
Gain ×1, ×5, IQ-MAG
Variable Gain
Gain x1 ×0.2 to ×2.0
Gain x5 ×1.0 to ×10.0
Gain IQ-MAG
Not SD, component display
0.620 to 6.240
SD, component display
0.580 to 5.840
Not SD, pseudo-composite display
0.570 to 5.700
SD, pseudo-composite display
0.520 to 5.260
Amplitude Accuracy ±0.5 %
Scale
Type AUTO, ITU-R BT.601, ITU-R BT.709, DCI, ITU-R BT.2020
Color Bar Saturation 75%, 100%
IQ Axis Show or hide
ARIB Check Marker OFF, STD-B66, STD-B72
Display Colors 7 colors to choose from
Variable Scale ON, OFF
Color Wheel ON, OFF
Vector Marker Display Displays a marker and numeric value at the specified location
on the vector display
Number of Markers 1
Numeric Display Displays the marker position numerically
Cb Displays the C
B
position as a percentage
Cr Displays the C
R
position as a percentage
deg Displays the hue in degrees.
d Displays the distance from the center as a percentage
Variable Marker Marker and frame resizing
Histogram Display Displays the Y, R, G, and B histograms
5-Bar Display
Function Converts an SDI signal into Y, R, G, B, and composite values,
and then displays the five peak levels.
Channel Assignment RGB, GBR
Scale %, mV, HEX, DEC
Error Level Based on the gamut error, composite gamut error, and
luminance error thresholds
To Next Page
Loading...
