Leader LV5300A - Starting the Event Log; Clearing the Event Log; Selecting the Overwrite Mode

16. Status Display
350
Model/Option
Event Name
(in frame)
Event Name
(one line display)
Description
EYE HD Of
HD OverShoot Falling Error
EYE SD Of
SD OverShoot Falling Error
SER20
Validity
Validity
Validity Error
CRC
CRC
CRC Error
Clip
Clip
Clip
Mute
Mute
Mute
Level Ov.
Level Ov.
Level Over
Parity
Parity
Parity Error
Code Vil.
Code Vil.
Code Violation
16.4.2 Starting the Event Log
To start the event log, follow the procedure below.
Procedure
STATUS → F•1 EVENT LOG → F•1 LOG: START / STOP
Settings
START: The event log is started. "NOW LOGGING" appears in the upper right of
the event log.
STOP: The event log is stopped. "LOGGING STOPPED" appears in the upper right
of the event log.
16.4.3 Clearing the Event Log
To delete the event log, follow the procedure below.
Procedure
STATUS → F•1 EVENT LOG → F•2 CLEAR
16.4.4 Selecting the Overwrite Mode
Up to 1000 events can be displayed. To select the action to perform when more than 1000
events occur, follow the procedure below.
Procedure
STATUS → F•1 EVENT LOG → F•3 LOG MODE: OVER WRT / STOP
Settings
OVER WRT: Oldest events are overwritten.
STOP: Additional events are not recorded.