3. SPECIFICATIONS
29
Line Select Displays the selected line
Low-Pass Filter The same as for gamut errors
3.3.16 Picture Screen
Quantization 8 bit (internal signal processing is performed with signed 12
bit or higher)
Level Mapping Maps the black level to 0 (8bit), SDI code value (when
receiving 10 bit RGB) 1024 to 255 (8 bit)
Display Sizes Reduced, actual size, ×2 (4K not supported), full frame (4K
not supported)
Quality Adjustment and Color Selection
Brightness, contrast, RGB gain, RGB bias, chroma gain,
monochrome display (RGB gain, RGB bias, chroma gain not
valid)
Frame Rate Converts the frame rate based on the LCD frame rate (60P,
59.94P, 50P)
SCTE-104 Display
Function SCTE-104 message monitoring
Supported Standard SMPTE 2010, ANSI/SCTE 104
Supported Format For Dual / Quad Link, Link1 only (Link cannot be changed)
Supported Input Channel SDI INPUT 1 / 2 / 3 / 4 (DS1 only)
Display Superimpose when SCTE-104 message is detected
Display Location OFF / Top left / Top right / Bottom left / Bottom right
Display Time 1 to 10 seconds (1 second step)
SPLICE Display When a splice_request_data message is detected, the details
of the message are displayed
Aspect Marker Display
3G (17:9 aspect ratio) 16:9, 14:9, 13:9, 4:3, 2.39:1
3G (16:9 aspect ratio), HD
17:9, 14:9, 13:9, 4:3, 2.39:1, AFD (*1)
SD 16:9, 14:9, 13:9, AFD (*1)
Aspect Marker Format Line, shadow (99 levels), or black
Safety Marker Size ARIB TR-B4, SMPTE RP-218, or user-defined
AFD Display (*1) Displays abbreviations for SMPTE ST 2016-1-2007 standard
AFD codes
Line Select Marks the selected line
Error Indication Displays markers in the gamut error and level error areas
*1 AFD Supports only SD or HD.
To Next Page
Loading...
