3. SPECIFICATIONS
36
3.3.23 HDR Display (SER23)
Supported Standard ITU-R BT.2100 (HLG: Hybrid Log Gamma, Full range /
Narrow range),
ITU-R BT.2100 (PQ: Perceptual Quantization, Full range /
Narrow range),
S-Log3, C-Log, Log-C
Supported Formats All formats except SD-SDI
Function
Video Waveform Display Scale, cursor
Vector Display Histogram
Picture Screen
HDR CINEZONE
HDR CINELITE
MAX CLL, MAX FALL (CEA-861 Supported)
Supports HLG and PQ
START MAX CLL, MAX FALL computation start
STOP MAX CLL, MAX FALL computation stop
MAX CLL, MAX FALL Error
When the measurement result is equal to or greater than the
specified threshold, it is displayed turns red and recorded as
the event log.
3.3.24 Audio Display
Input Signal SDI embedded audio
Format L-PCM
Sampling Frequency 48 kHz
Quantization 24 bit
Supported Standard
3G, HD SMPTE ST 299
SD SMPTE ST 272
Clock Generation Generated from the video clock
Synchronization Must be synchronized to the video clock.
All SDI signals must be synchronized.
Channel Separation Separates up to two groups (8 channels) from an SDI input.
Maximum Number of Display Channels
8 (from any SDI input, displayed in groups)
Display Types Level meter, Lissajous (SER20), correlation meter (SER20),
surround (SER20), status (SER20)
To Next Page
Loading...
