Leader LV5300A - Specifications; General

3. SPECIFICATIONS
7
3. SPECIFICATIONS
3.1 General
The LV5300/LV5300A WAVEFORM MONITOR, LV5350 WAVEFORM MONITOR, and LV7300
RASTERIZER are compact waveform display devices supporting 12G-SDI to SD-SDI standards.
The LV5300/LV5300A and LV5350 are 3U half-rack size waveform monitors with a built-in LCD
while the LV7300 is a 1U half-rack size rasterizer that can be connected to an external LCD.
The LV5300/LV5300A and LV7300, while being compact, support the eye pattern display of a
variety of SDI signals up to 12G-SDI. The video signal waveform display, vector display, and
picture display enable quality control of various video signals. The status display allows you to
view various error statuses and analyze system stability and problems using the event log.
Audio signals embedded in SDI signals can be shown on the level display, Lissajous display,
and status display.
The LV5300/LV5300A, LV5350, and LV7300 employ DC power supplies, which enables them
to be used in locations where AC power supplies are not available. Moreover, the
LV5300/LV5300A and LV5350 can be operated off of batteries by installing a battery mount
option.
For operating these instruments, in addition to the keys and knobs, which are available on
conventional instruments, USB mouse, touch panel (*1), and remote control through a Web
browser can be used according to your application.
Furthermore, a rich lineup of options is available in addition to these powerful functions,
operability, and portability. Through the combination of options, these instruments can be
used in the measurement and monitoring of video and audio signals in a wide variety of
applications including (1) quality control applications of video and audio signals at filming
locations, (2) video-engineer station applications in outside broadcast vans, (3) maintenance
applications to isolate fault areas when problems occur, (4) post production applications for
controlling the video signal levels, and (5) broadcast equipment compliance applications for
determining whether video and audio signals comply with appropriate standards.
*1 The LV7300 requires a touch-panel type external monitor to be connected to the main unit. The
touch panel interface on the external monitor is connected to the LV7300’s USB port. The video
interface on the external monitor is connected to the LV7300’s monitor output connector.
LEADER does not guarantee that all touch panel type monitors will work with the LV7300.