3. SPECIFICATIONS
31
TV Commercial Material Checking
Function Checks whether closed caption displays are present during
the closed caption prohibited time
Check Period The material start time and end time can be specified using
timecodes.
Log Display Color
Closed Caption during Prohibited Time
Red
Closed Caption Not during Prohibited Time
Green
Check Result Display Displays OK or NG when measurements are complete
3.3.18 CINELITE Display
Function Video levels are displayed numerically.
f Stop Display (not supported on the SER23)
Displays f Stop values relative to a reference point
Set in reference to an object with an 18% reflectance
f Stop gamma correction
Fundamental Gamma ITU-R BT.709, hybrid log gamma (HLG)(SER23), PQ (SER23),
S-Log3 (SER23)
User Correction Table 3 types (data acquired with a real device)
% Display (SDR) Displays the luminance level or RGB level as a percentage
with the SDI code value 64 assumed to be 0% and the SDI
code value 940 assumed to be 100%
Gradation Display Displays the luminance or RGB value with the SDI code value
64 assumed to be 0 and the SDI code value 940 assumed to
be 255
CV Display Decimal, hexadecimal
Displays the SDI signal code value as YCBCR or RGB
according to the input signal
(only for measurement size 1×1)
To Next Page
Loading...
