Leader LV5300A - Page 49

3. SPECIFICATIONS
32
HDR Display (SER23)
HLG
System Gamma OFF
Narrow Range Displays the relative HLG luminance with the SDI code value
64 assumed to 0% and 940 assumed to be 1200% or 100%
Full Range Displays the relative HLG luminance with the SDI code value
0 assumed to 0% and 1023 assumed to be 1200% or 100%
System Gamma ON Assuming a Display with a peak brightness of 1000 Nits
Narrow Range Displays the relative HLG luminance with the SDI code value
64 assumed to 0Nits and 940 assumed to be 1000Nits
Full Range Displays the relative HLG luminance with the SDI code value
0 assumed to 0Nits and 1023 assumed to be 1000Nits
PQ Converts the luminance level to the display’s Nits and displays
the result
Narrow Range SDI code value 64 to 940 are assumed to be 0Nits to
10000Nits
Full Range SDI code value 0 to 1023 are assumed to be 0Nits to
10000Nits
S-Log3 Converts the reflectance to IRE with SDI code value 95
assumed to be 0% and 589 assumed to be 100% and
displays it as a percentage
C-Log Displays the percentage with the SDI code value 128
assumed to 0% and 614 assumed to be 100%
Log-C
EI200 Displays the percentage with the SDI code value 95 assumed
to 0.39% and 853 assumed to be 83%
EI400 Displays the percentage with the SDI code value 95 assumed
to 0.39% and 917 assumed to be 90%
EI800 Displays the percentage with the SDI code value 95 assumed
to 0.39% and 976 assumed to be 95%
EI1600 Displays the percentage with the SDI code value 95 assumed
to 0.39% and 1022 assumed to be 94%
Measured Points 3
Measurement Sizes 1 × 1 pixel, 3 × 3 pixels, and 9 × 9 pixels