Leader LV5300A - Headphone Output; Control Connectors

3. SPECIFICATIONS
19
TMDS Output Connector
Function Output the displayed screen to an HDMI monitor (*2)
Output Connector HDMI
Number of Output Connectors
1
Signal Format Single Link T.M.D.S
DDC Not supported
HOT PLUG Detection Not supported
Output Signal Outputs the LCD screen
Image 1920×1080
Frame Frequency 60P, 59.94P, 50P, 48P, 47.95P
Synchronization Synchronized with the LCD refresh rate (free run)
Touch Control Touch control possible by connecting the USB touch panel
interface of a touch panel monitor to the LV5300/LV5300A,
LV5350 or LV7300 (*3)
*1 Equivalent to 48I when the SDI input is 48P.
*2 LEADER does not guarantee the operation on all HDMI monitors.
*3 LEADER does not guarantee that all touch panel type monitors will work with the LV7300.
3.3.7 Headphone Output
Output Connector
LV5300/LV5300A, LV5350 One 3.5 mm mini jack (stereo)
LV7300 One stereo jack
Output Signal 2 channels from the audio signals that are being displayed on
the screen
(downmixed Lt and Rt are also possible)
Sampling Frequency 48 kHz
Volume Adjustment Using the menu
Power Output 100 mW maximum (into 8 Ω load)
3.3.8 Control Connectors
USB Port
Port Type Standard A
Number of Ports 2
Specifications USB 2.0
Compatible Devices USB memory, USB mouse, touch panel monitor
USB Memory Feature Saves capture data, preset data, event log data, and data
dumps
Supported USB Memory Format
FAT32 (*1)
USB Mouse Feature Used to control on the screen
Touch panel monitor Touch control of the displayed screen (*2, *3)