Leader LV5300A - Surround Display (SER20); Adjusting the Surround Waveform Intensity; Adjusting the Scale Intensity

15. Audio Display
326
15.7 Surround Display (SER20)
To show the surround display, set F•1 DISPLAY MODE on the AUDIO menu to SURROUND.
To configure the surround display settings, press F•3 SURROUND SETUP. This setting is
available when F•1 DISPLAY MODE is set to SURROUND.
AUDIO → F•1 DISPLAY MODE and select SURROUND → F•3 SURROUND SETUP →
Figure 15-13 Surround display
15.7.1 Adjusting the Surround Waveform Intensity
To adjust the surround waveform intensity, follow the procedure below.
Press the function dial (F•D) to return the setting to its default value (4).
Procedure
AUDIO → F•3 SURROUND SETUP → F•1 SURROUND INTEN: -8 - 4 - 7
15.7.2 Adjusting the Scale Intensity
To adjust the intensity of the surround and meter scales, follow the procedure below.
Press the function dial (F•D) to return the setting to its default value (4).
Procedure
AUDIO → F•3 SURROUND SETUP → F•2 SCALE INTEN: -8 - 4 - 7