Leader LV5300A - Page 26

3. SPECIFICATIONS
9
• Audio Analysis Functions (SER20)
For audio signals, level meter display is possible on audio signals embedded in SDI.
The SER20 AUDIO option allows Lissajous display, surround display and detection of mute
and clip errors. Detected errors can be recorded in event logs.
• Eye Pattern Display (LV5300/LV5300A/LV7300-SER02/SER28) (*1)
Eye pattern display and jitter display, which are physical layer measurements of SDI signals
from SD-SDI to 12G-SDI, are possible. These physical layer measurements can be
performed using cursors or performed automatically. Measurements can be exported via a
network.
A histogram can be superimposed on the eye pattern display.
• Closed Caption Decode Display Function (SER21)
Japanese closed captions embedded in SDI signals, CEA-608 and CEA-708 closed captions,
teletext, and OP47 subtitles can be decoded and displayed.
• External Sync Signal Input
The phase difference and synchronization states of SDI or IP video signals can be shown
graphically based on an external reference sync signal (black burst, tri-level sync).
• Customizable Layout (SER26)
Video signal waveforms, vector waveforms, picture, and other items of input video signals
can be laid out freely in the sizes of your choice. Up to 2 input signals can be displayed
simultaneously.
• SDI Reclock Output and SDI Signal Generation Function (SER24/SER28)
Two SDI signal reclock output connectors are available. SDI OUTPUT 1 can reclock and
output a signal from SDI INPUT 1 or SDI INPUT 2 by switching.
The function of SDI OUTPUT 2 on the LV5300/LV5300A and LV5350 can be switched
between the reclocked output of the SDI signal of SDI INPUT 2, the SD output of the screen
display, and the SDI signal generation function.
The function of SDI OUTPUT 2 on the LV7300 can be switched between the reclocked output
of the SDI signal of SDI INPUT 2 and the SDI signal generation function.
The SDI signal generation function supports HD-SDI to 12G-SDI. For the pattern, you can
select the HD multiformat color bar, the 4K multiformat color bar, or the color raster pattern,
which allows you to select any level. You can also overlay a moving box or insert embedded
audio. When SER23 is installed, the HDR color bar can be output.
• External Monitor Output
The SDI output of the measurement screen is transmitted from SDI OUTPUT 2 on the
LV5300/LV5300A and LV5350 by switching the function and from the SDI monitor output
connector on the LV7300. The signal can be displayed on an external SDI monitor in full
high definition resolution.
Further, because the LV7300 can also output the measurement screen in TMDS format from
the monitor output connector, the output signal can be displayed on an HDMI monitor (*2)
in full high definition resolution.