3. SPECIFICATIONS
10
● CINELITE Feature
The CINELITE feature makes it easy to manage the levels of specific points on the picture
display. This is useful for adjusting the gain of multiple cameras to the same reference point.
Furthermore, the CINELITE Advanced feature makes it possible to synchronize
measurements with the video signal waveform display and vector display.
The CINEZONE feature makes it possible to check the luminance distribution of the whole
picture display at a glance.
• Screen Capture Feature
A screen capture feature, which captures the entire display as still-image data, is available.
Not only can captured data be displayed on the instrument, but it can also be compared
with an input signal or saved to a USB memory device as bitmap data for viewing on a PC.
• Time Code Display
The timecodes embedded in SDI signals can be displayed. The timecode can also be used as
the timestamp in the event log.
• External Remote Connector
A contact terminal can be used to load presets, switch the input signal, and transmit alarms.
• Ethernet Port
The following features become available when you connect the instrument to a PC: remote
control through TELNET, file transfer through FTP, remote control and alarm generation
through SNMP, remote control from a Web browser through HTTP, and internal clock
synchronization through SNTP. Using the LV7290 REMOTE CONTROLLER (sold separately)
allows up to eight LV5300/LV5300As, LV5350s, or LV7300s to be remote controlled.
• HDR (SER23)
Level monitoring is possible on HLG and PQ defined in ITU-R BT.2100 as well as S-Log3, C-
LOG, and Log-C compatible HDR signals. Level control is possible based on the estimated
brightness (Nits) of a display taking the OOTF into consideration. Video signal waveform
display supports IRE scale as well as HDR scale. On CINEZONE display, the SDR area is
displayed in monochrome, while the HDR area is displayed using colors corresponding to the
brightness. This makes it easy to view the brightness distribution in the HDR area.
Furthermore, you can display the MAX FALL and MAX CLL compliant with CEA-861.
• Focus Assist (SER25)
A new focusing algorithm based on nonlinear super-resolution technology has been
developed, allowing highly sensitive focusing even on low-contrast images that were difficult
to be focused in on in the past. You can select the sensitivity according to the image scene.
*1 Only SDI INPUT 1 supports the eye pattern display.
*2 LEADER does not guarantee the operation on all HDMI monitors.
To Next Page
Loading...
