16. Status Display
340
• Parity Error
Select whether to detect parity errors in the ancillary data.
OFF / ON
• Checksum Error
Select whether to detect checksum errors in the ancillary data.
OFF / ON
• BCH Error(Except SD)
Select whether to detect BCH errors in the embedded audio. This setting is valid when the
input signal is not SD.
OFF / ON
• DBN Error
Select whether to detect DBN errors in the embedded audio.
OFF / ON
• Parity Error(Except SD)
Select whether to detect parity errors in the embedded audio. This setting is valid when
the input signal is not SD.
OFF / ON
• Inhibit Line Error
Select whether to detect embedding errors in the embedded audio.
OFF / ON
• Sample Count Error
Select whether to detect sample number errors in the embedded audio.
An error is counted when audio that is asynchronous to the video is embedded. If a
certain number of audio data samples are not embedded in a certain number of video
frames, it will be considered and error (as defined in SMPTE ST 299 and SMPTE ST 272).
OFF / ON
To Next Page
Loading...
