16. Status Display
374
• PAYLOAD ID
This is a packet that is used to identify the video format. It conforms to SMPTE ST 352.
[See also] 16.9.3, “Displaying Payload IDs”
• EIA-708
This is one of the closed caption specifications. This packet is embedded in the V-ANC
area.
This is used for digital video closed caption data. It only supports alphanumeric
characters.
[See also] 16.9.11, “Displaying EIA-708 Data”
• EIA-608
This is one of the closed caption specifications. This packet is embedded in the V-ANC
area.
This was previously used for analog composite (embedded in line number 21) closed
caption data. It only supports alphanumeric characters.
[See also] 16.9.12, “Displaying EIA-608 Data”
• PROGRAM
It is embedded in the V-ANC area.
[See also] 16.9.13, “Displaying Program Data”
• DATA BROADCAST
It is embedded in the V-ANC area.
• VBI (when the input signal is SD)
It is embedded in the V-ANC area.
[See also] 16.9.14, “Displaying VBI Data”
• AFD
It is embedded in the V-ANC area.
[See also] 16.9.11, “Displaying AFD Packets”
• CLOSED CAPTION 1 to 3 (3G-B is not supported)
This is a closed caption information packet that is embedded in the V-ANC area. Up to
three closed caption data entries can be embedded.
[See also] 16.9.6, “Displaying Closed Caption Packets”
• NET-Q (3G-B is not supported)
This is an inter-stationary control signal.
[See also] 16.9.7, “Displaying the Inter-Stationary Control Signal”
• TRIGGER PACKET (3G-B is not supported)
This is the data transmission trigger signal.
[See also] 16.9.8, “Displaying the Data Broadcast Trigger Signal”
• USER DATA 1 and 2 (3G-B is not supported)
Up to two packets of user-defined data.
[See also] 16.9.9, “Displaying User Data”
To Next Page
Loading...
