3. SPECIFICATIONS
44
Inter-Stationary Control Signal (NET-Q) Display (*1)
ARIB STD-B39
Analysis display of inter-stationary control signals
Text, hexadecimal, binary
Q signal logging
Analysis display of the format ID
Outputs Q signal logs in CSV format through a USB memory
device
Data Broadcast Trigger Signal Display (*1)
ARIB STD-B35
Text, hexadecimal, binary
V-ANC User Data Display (*1)
ARIB TR-B23
Hexadecimal, binary
AFD Packet Display SMPTE ST 2016-3
Text, hexadecimal, binary
SCTE-104 Display
Function SCTE-104 message monitoring
Supported Standard SMPTE 2010, ANSI/SCTE 104
Supported Format For Dual / Quad Link, Link1 only (Link cannot be changed)
Supported Input Channel SDI INPUT 1 / 2 / 3 / 4 (DS1 only)
Display Superimpose when SCTE-104 message is detected
Display Time 1 to 10 seconds (1 second step)
Log Records when SCTE-104 message is detected
DUMP Display Displays DUMP data when SCTE-104 message is detected
SPLICE Display When a splice_request_data message is detected, the details
of the message are displayed
SPLICE Log Records when a splice_request_data message is detected
SR Live Packet Display Text, hexadecimal, binary
User-Defined ANC Packet Display
DID, SDID
Y, C
Hexadecimal, binary
*1 Supported video formats are as follows:SD, HD, 3G-A,
3G(DL)-4K (close caption decoding only for link 1), 12G (close caption decoding only for sub 1)
To Next Page
Loading...
