5. BEFORE YOU BEGIN MEASURING
59
• When installing the ZEN series instruments side by side, make sure that the intake and
exhaust ports are not next to each other.
• When installing the LV5300/LV5300A and the LV5350 or LV5600 side by side, place the
LV5300/LV5300A on the right side when viewed from the front panel side.
• When installing the LV5350 and LV5600 side by side, place the LV5350 on the right side
when viewed from the front panel side, and separate the LV5350 and LV5600 by a
partition.
• When installing two ZEN series instruments side by side, install them at the following
intervals.
To Next Page
Loading...
