Dell MXL 10GbE - Show Alarms

To view the current options set for the service timestamps command, use the
show running-config command.
show alarms
View alarms.
Syntax
show alarms
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell# show alarms
-- Minor Alarms --
Alarm Type Duration
---------------------------------------
No minor alarms
-- Major Alarms --
Alarm Type Duration
----------------------------------------
No major alarms
Dell#
show command-history
Display a buffered log of all commands all users enter along with a time stamp.
Syntax
show command-history
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
One trace log message is generated for each command. No password information
is saved to this file.
Example
Dell#show command-history
[4/20 10:27:23]: CMD-(CLI):[enable]by default from console
100
Control and Monitoring