Dell MXL 10GbE User Manual

Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
debug ip dhcp clients events
Enable the display of log messages for the following events on DHCP client interfaces: IP address
acquisition, IP address release, Renewal of IP address and lease time, and Release of an IP address.
Syntax
debug ip dhcp client events [interface type slot/port]
Parameters
interface type
slot/ port
Display log messages for DHCP events on the specified
interface.
• For a 10-GigabitEthernet Ethernet interface, enter
TenGigabitEthernet then the slot/port numbers; for
example,
tengigabitethernet 1/3.
• For a 40-GigabitEthernet Ethernet interface, enter
FortyGigabitEthernet then the slot/port numbers;
for example,
fortygigabitethernet 0/2.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
debug ip dhcp clients packets
Enable the display of log messages for all DHCP packets sent and received on DHCP client interfaces.
Syntax
debug ip dhcp client packets [interface type slot/port]
Parameters
interface type
slot/ port
Display log messages for DHCP packets sent and received on
the specified interface.
• For a 10-GigabitEthernet Ethernet interface, enter
TenGigabitEthernet then the slot/port numbers; for
example, tengigabitethernet 1/3.
• For a 40-GigabitEthernet Ethernet interface, enter
FortyGigabitEthernet then the slot/port numbers;
for example, fortygigabitethernet 0/2.
Dynamic Host Configuration Protocol (DHCP)
493

Dell MXL 10GbE Specifications

General

Data Transfer Rate	10 Gbps per port
Switching Capacity	1.28 Tbps
Connectivity Technology	Wired
Model	MXL 10GbE
Type	Switch
Power Supply	Dual hot-swappable power supplies
Management	CLI, Web-based GUI, SNMP
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	10% to 90% non-condensing
Dimensions	17.3 x 17.4 x 1.7 inches (43.9 x 44.2 x 4.3 cm)