Dell MXL 10GbE - Show Ip Dhcp Snooping

Related
Commands
ip dhcp snooping trust — configures an interface as trusted.
show ip dhcp snooping
Display the contents of the DHCP binding table.
Syntax
show ip dhcp snooping binding
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
clear ip dhcp snooping — clears the contents of the DHCP binding table.
username
Establish an authentication system based on user names.
Syntax
username name [access-class access-list-name] [nopassword |
{password | secret} [encryption-type] password] [privilege
level] [role role-name]
If you do not want a specific user to enter a password, use the nopassword
option.
To delete authentication for a user, use the no username name command.
Parameters
name Enter a text string for the name of the user up to 63
characters.
access-class
access-list-
name
Enter the keywords access-class then the name of a
configured access control list (either an IP access control list
or MAC access control list).
nopassword Enter the keyword nopassword to specify that the user
should not enter a password.
password Enter the keyword password then the encryption-type
or the password.
secret Enter the keyword secret then the encryption-type or
the password.
Security
1205