Command
History
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Usage
Information
Omitting the keyword detail displays only the remote chassis ID, Port ID, and
Dead Interval.
Example
R1(conf-if-gi-1/31)#do show lldp neighbors
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
--------------------------------------------------------------
Gi 1/21 R2 GigabitEthernet 2/11 00:01:e8:06:95:3e
Gi 1/31 R3 GigabitEthernet 3/11 00:01:e8:09:c2:4a
show lldp statistics
Display the LLDP statistical information.
Syntax
show lldp statistics
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show lldp statistics
--------- LLDP GLOBAL STATISTICS ON CHASSIS ------------
Total number of neighbors: 2
Last table change time: 1w5d4h, In ticks: 52729764
Total number of Table Inserts: 56
Total number of Table Deletes: 54
Total number of Table Drops: 0
Total number of Table Age Outs: 12
Dell#
show running-config lldp
Display the current global LLDP configuration.
Syntax
show running-config lldp
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Link Layer Discovery Protocol (LLDP)
873
To Next Page
Loading...
