Dell MXL 10GbE - Service-Class Dot1 P-Mapping

service-class dot1p-mapping
This command maps an 802.1p priority to an internal traffic class.
Syntax
service-class dot1p-mapping user-priority
Parameters
user-priority The user-priority value ranges from 0 to 7.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Per-Port QoS Commands
Per-port QoS (port-based QoS) allows you to define the QoS configuration on a per-physical-port basis.
dot1p-priority
Assign a value to the IEEE 802.1p bits on the traffic this interface receives.
Syntax
dot1p-priority priority-value
To delete the IEEE 802.1p configuration on the interface, use the no dot1p-
priority command.
Parameters
priority-value Enter a value from 0 to 7.
dot1p Queue Number
0 0
1 0
2 0
3 1
4 2
5 3
6 3
7 3
Defaults none
Quality of Service (QoS)
1073