Fabric Id : C2
Asset tag : test
PSOC FW Rev : 0xb
ICT Test Date : 0-0-0
ICT Test Info : 0x0
Max Power Req : 31488
Fabric Type : 0x3
Fabric Maj Ver : 0x1
Fabric Min Ver : 0x0
SW Manageability: 0x4
HW Manageability: 0x1
Max Boot Time : 6 minutes
Link Tuning : unsupported
Auto Reboot : enabled
Burned In MAC : 00:01:e8:43:de:e1
No Of MACs :3
Related
Commands
asset-tag — Assigns and stores a unique asset-tag to the stack member.
show version — Displays the Dell Networking OS version.
show processes memory — Displays memory usage based on running processes.
show system stack-ports — Displays information about the stack ports on all
switches in the stack.
show hardware stack-unit — Displays the data plane and management plane input
and output statistics of a particular stack member.
stack-unit priority — Configures the ability of the switch to become the
management unit of a stack.
show tech-support
Display a collection of data from other show commands, necessary for Dell Networking OS technical
support to perform troubleshooting on MXL switches.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keyword stack-unit to view CPU
memory usage for the stack member designated by unit-id.
The range is 0 to 7.
page (OPTIONAL) Enter the keyword page to view 24 lines of text
at a time. Press the SPACE BAR to view the next 24 lines.
Press ENTER to view the next line of text.
When using the pipe command ( | ), enter one of these
keywords to filter command output. For details about
filtering commands, refer to CLI Basics.
Control and Monitoring
117
To Next Page
Loading...
