Dell MXL 10GbE - Logging Facility

logging facility
Configure the Syslog facility used for error messages sent to Syslog servers.
Syntax
logging facility [facility-type]
To return to the default values, use the no logging facility command.
Parameters
facility-type (OPTIONAL) Enter one of the following parameters:
• auth (authorization system)
• cron (Cron/at facility)
• deamon (system deamons)
• kern (kernel)
• local0 (local use)
• local1 (local use)
• local2 (local use)
• local3 (local use)
• local4 (local use)
• local5 (local use)
• local6 (local use)
• local7 (local use)
• lpr (line printer system)
• mail (mail system)
• news (USENET news)
• sys9 (system use)
• sys10 (system use)
• sys11 (system use)
• sys12 (system use)
• sys13 (system use)
• sys14 (system use)
• syslog (Syslog process)
• user (user process)
• uucp (Unix to Unix copy process)
The default is local7.
Defaults local7
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Simple Network Management Protocol (SNMP) and Syslog
1245