Dell MXL 10GbE - Show Interfaces Stack-Unit

Field Description
Description Displays the description (if any) manually configured for the
interface.
Example
Dell#show interface description
Interface OK Status Protocol Description
TenGigabitEthernet 0/1 NO admin down down
TenGigabitEthernet 0/2 NO admin down down
TenGigabitEthernet 0/3 NO admin down down
TenGigabitEthernet 0/4 NO admin down down
TenGigabitEthernet 0/5 NO admin down down
TenGigabitEthernet 0/6 NO admin down down
TenGigabitEthernet 0/7 NO up down
TenGigabitEthernet 0/8 YES up up
TenGigabitEthernet 0/9 NO admin down down
TenGigabitEthernet 0/10 NO admin down down
TenGigabitEthernet 0/11 NO admin down down
TenGigabitEthernet 0/12 NO admin down down
TenGigabitEthernet 0/13 NO admin down down
TenGigabitEthernet 0/14 NO admin down down
TenGigabitEthernet 0/15 NO admin down down
TenGigabitEthernet 0/16 YES up up
TenGigabitEthernet 0/17 NO admin down down
TenGigabitEthernet 0/18 NO admin down down
TenGigabitEthernet 0/19 NO admin down down
TenGigabitEthernet 0/20 NO admin down down
TenGigabitEthernet 0/21 NO admin down down
Related
Commands
show interfaces – displays information on a specific physical interface or virtual
interface.
show interfaces stack-unit
Display information on all interfaces on a specific MXL switch stack member.
Syntax
show interfaces stack-unit unit-number
Parameters
unit-number Enter the stack member number. The range is from 0 to 5.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show interfaces stack-unit 0
TenGigabitEthernet 0/1 is down, line protocol is down
Hardware is DellForce10Eth, address is 00:1e:c9:f1:00:05
Current address is 00:1e:c9:f1:00:05
Server Port AdminState is Down
Pluggable media not present
Interfaces
587