Dell MXL 10GbE - Description

description
Enter an identifying description of the ring.
Syntax
description Word
To remove the ring description, use the no description [Word] command.
Parameters
Word Enter a description of the ring. Maximum: 255 characters.
Defaults none
Command
Modes
CONFIGURATION (conf-frrp)
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
disable
Disable the resilient ring protocol.
Syntax
disable
To enable the Resilient Ring Protocol, use the no disable command.
Defaults Disabled
Command
Modes
CONFIGURATION (conf-frrp)
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
interface
Configure the primary, secondary, and control-vlan interfaces.
Syntax
interface {primary interface secondary interface control-vlan
vlan-id}
To return to the default, use the no interface {primary interface
secondary interface control-vlan vlan-id} command.
Parameters
primary
interface
Enter the keyword primary to configure the primary
interface then one of the following interfaces and slot/port
information:
Force10 Resilient Ring Protocol (FRRP)
529