Dell MXL 10GbE - Default-Metric

default-metric
Change the metrics of redistributed routes to a value useful to OSPF. Use this command with the
redistribute command.
Syntax
default-metric number
To return to the default values, use the no default-metric [number]
command.
Parameters
number Enter a number as the metric. The range is from 1 to
16777214.
Defaults Disabled.
Command
Modes
ROUTER OSPF
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
redistribute — redistributes routes from other routing protocols into OSPF.
description
Add a description about the selected OSPF configuration.
Syntax
description description
To remove the OSPF description, use the no description command.
Parameters
description Enter a text string description to identify the OSPF
configuration (80 characters maximum).
Defaults none
Command
Modes
ROUTER OSPF
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
show ip ospf asbr — displays the VLAN configuration.
932
Open Shortest Path First (OSPFv2 and OSPFv3)