Dell MXL 10GbE - Privilege Level (LINE Mode)

privilege level (LINE mode)
Change the access level for users on the terminal lines.
Syntax
privilege level level
To delete access to a terminal line, use the no privilege level level
command.
Parameters
level level
Enter the keyword level then a number for the access level.
The range is from 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI
modes.
Defaults level = 15
Command
Modes
LINE
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Authentication and Password Commands
To manage access to the system, use the following the commands.
aaa authentication enable
Configure AAA Authentication method lists for user access to EXEC privilege mode (the “Enable” access).
Syntax
aaa authentication enable {default | method-list-name} method
[... method2]
To return to the default setting, use the no aaa authentication enable
{default | method-list-name} method [... method2] command.
Parameters
default Enter the keyword default then the authentication
methods to use as the default sequence of methods for the
Enable login. The default is default enable.
method-list-
name
Enter a text string (up to 16 characters long) to name the list
of enabled authentication methods activated at login.
method Enter one of the following methods:
Security
1161