Dell MXL 10GbE - Clear Hardware System-Flow

clear hardware system-flow
Clear system-flow statistics from selected hardware components.
Syntax
clear hardware system-flow layer2 stack-unit 0–5 port-set 0–0
counters
Parameters
stack-unit 0–5 Enter the keywords stack-unit then 0 to 5 to select a
particular stack member and then enter one of the following
command options to clear a specific collection of data.
port-set 0–0
counters
Enter the keywords port-set along with a port-pipe
number, then the keyword
counters to clear the system-
flow counters on the selected port-pipe.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
show hardware stack-unit — displays the data plane or management plane input
and output statistics of the designated component of the designated stack
member.
show hardware layer2 acl
Display Layer 2 ACL or eg data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer2 acl stack-unit 0–5 port-set 0–0
Parameters
stack-unit0–5 Enter the keyword stack-unit then 0 to 5 to select a stack
ID.
port-set 0–0 Enter the keywords port-set with a port-pipe number.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Debugging and Diagnostics
473