Dell MXL 10GbE - Show Ip Pim Snooping Interface

Parameters
mapping (OPTIONAL) Enter the keyword mapping to display the
multicast groups-to-RP mapping and information on how
RP is learnt.
group-address (OPTIONAL) Enter the multicast group address mask in
dotted decimal format to view RP for a specific group.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#sh ip pim rp
Group RP
224.2.197.115 165.87.20.4
224.2.217.146 165.87.20.4
224.3.3.3 165.87.20.4
225.1.2.1 165.87.20.4
225.1.2.2 165.87.20.4
229.1.2.1 165.87.20.4
229.1.2.2 165.87.20.4
Dell#
Example
(Mapping)
Dell#sh ip pim rp mapping
Group(s): 224.0.0.0/4
RP: 165.87.20.4, v2
Info source: 165.87.20.5, via bootstrap, priority 0
Uptime: 00:03:11, expires: 00:02:46
RP: 165.87.20.3, v2
Info source: 165.87.20.5, via bootstrap, priority 0
Uptime: 00:03:11, expires: 00:03:03
Dell#
Example
(Address)
Dell#sh ip pim rp 229.1.2.1
Group RP
229.1.2.1 165.87.20.4
Dell#
show ip pim snooping interface
Display information on VLAN interfaces with PIM-SM snooping enabled.
Syntax
show ip pim snooping interface [vlan vlan-id]
Parameters
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display information about a
specified VLAN configured for PIM-SM snooping. The valid
VLAN IDs range is from 1 to 4094.
1026
PIM-Sparse Mode (PIM-SM)