Dell MXL 10GbE - Show Cam-Acl-Egress

L2Acl : 5
Ipv4Acl : 5
Ipv6Acl : 1
Ipv4Qos : 1
L2Qos : 1
L2PT : 0
IpMacAcl : 0
VmanQos : 0
VmanDualQos: 0
Ipv4pbr : 0
Dell#
show cam-acl-egress
Display the details of the FP groups allocated for the egress ACL.
Syntax
show cam-acl-egress
Defaults none
Command
Modes
Configuration
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The display reflects the settings implemented with the cam-acl-egress
command.
Example
Dell#show cam-acl-egress
-- Chassis Egress Cam ACL --
Current Settings(in block sizes)
L2Acl : 1
Ipv4Acl : 1
Ipv6Acl : 2
-- Stack unit 0 --
Current Settings(in block sizes)
L2Acl : 1
Ipv4Acl : 1
Ipv6Acl : 2
Dell#
408
Content Addressable Memory (CAM)