Dell MXL 10GbE - Ip Router Isis

ip router isis
Configure IS-IS routing processes on an interface and attach an area tag name to the routing process.
Syntax
ip router isis [tag]
To disable IS-IS on an interface, use the no ip router isis [tag] command.
Parameters
tag (OPTIONAL) The tag you specify identifies a specific area
routing process. If you do not specify a tag, a null tag is
assigned.
Defaults No processes are configured.
Command
Modes
INTERFACE
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To assign a network entity title to enable IS-IS, use the net command.
Related
Commands
• net — configures an IS-IS network entity title (NET) for the routing process.
• router isis — enables the IS-IS routing protocol.
ipv6 router isis
Enable the IPv6 IS-IS routing protocol and specify an IPv6 IS-IS process.
Syntax
ipv6 router isis [tag]
To disable IS-IS routing, use the no router isis [tag] command.
Parameters
tag (OPTIONAL) This parameter is a unique name for a routing
process. A null tag is assumed if the tag option is not
specified. The tag name must be unique for all IP router
processes for a given router.
Defaults Not configured.
Command
Modes
ROUTER ISIS
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Configure a network entity title (the net command) to specify the area address and
the router system ID.
Intermediate System to Intermediate System (IS-IS)
809