distance
Define an administrative distance for particular routes to a specific IP address.
Syntax
distance weight [ip-address mask access-list-name]
To delete the settings, use the no distance weight [ip-address mask
access-list-name] command.
Parameters
weight Specify an administrative distance. The range is from 1 to
255. The default is 110.
ip-address (OPTIONAL) Enter a router ID in the dotted decimal format. If
you enter a router ID, include the mask for that router
address.
mask (OPTIONAL) Enter a mask in dotted decimal format or /n
format.
access-list-
name
(OPTIONAL) Enter the name of an IP standard access list, up
to 140 characters.
Defaults 110
Command
Modes
ROUTER OSPF
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
distance ospf
Configure an OSPF distance metric for different types of routes.
Syntax
distance ospf [external dist3] [inter-area dist2] [intra-area
dist1]
To delete these settings, use the no distance ospf command.
Parameters
external dist3 (OPTIONAL) Enter the keyword external then a number to
specify a distance for external type 5 and 7 routes. The range
is from 1 to 255. The default is 110.
inter-area dist2 (OPTIONAL) Enter the keywords inter-area then a number
to specify a distance metric for routes between areas. The
range is from 1 to 255. The default is
110.
intra-area dist1 (OPTIONAL) Enter the keywords intra-area then a number
to specify a distance metric for all routes within an area. The
range is from 1 to 255. The default is 110.
Open Shortest Path First (OSPFv2 and OSPFv3)
933
To Next Page
Loading...
